Do not know what is the best for your sauna? Contact us, we will help!
Code 14264, 6430041122104

ELECTRIC SAUNA HEATER IKI PILARI 4,5kW WITH CONTROL UNIT WAVE COM4

Model:

IKI 4,5 kW
IKI 7,5 kW
IKI 6 kW
IKI 9 kW
IKI 10 kW
IKI 3,3 kW
IKI 12 kW

Power output, (kW):

4,5 kW
7,5 kW
6 kW
9 kW
10 kW
3,3 kW
12 kW

Control unit:

WAVE COM4
Built-in
IKI FINLANDIA
Without control panel
PRO B2
WAVE COM4 + S2-30
PRO B2 + S2-30
WAVE
UKU GB WIFI

Sauna room max, (m3):

6 m3
12 m3
9 m3
16 m3
18 m3
5 m3
24 m3
In stock
Ask About / Make Offer

1 515.73 €

*inc.VAT 20%

Updated 27.06.2024
Commentaries {0}
Print page
IKI 4,5kW heater model is sort of the “midsize” model of Pillar IKI product line for small saunas. IKI 5kW is suitable for 4–6 cubic metre sized saunas. The heater can be fitted into a very small space thanks to its small size (24 cm in diameter) and the small safety distances to inflammable materials (10 cm). The stone capacity is still a massive 90 kilos, which is heated up efficiently by U-shaped resistors through the entire height of the heater. Sauna gets fully heated in 45–60 minutes. The large amount of stones guarantees a hefty oxygen-rich sauna experience, plenty of heat for those who like it hot and moist enough for everyone else to enjoy and relax in. The heater is available with a mounted control unit or separate control panel.
 
Stones are not included - Sauna stones

 


Safety distances to walls made of wood or other inflammable structures: on the sides 10 cm, on the back 10 cm, on the top 60 cm.

Note that the heat is stored in the stones, wherefore when measuring the stove near-by glass and stone surfaces need not be taken into account. Choose a larger stove if there are big areas of glass and stone close-by and if the size of the sauna room is close to the maximum size for the stove.
WAVE COM4

Innovative Technology
 • Control panel for inside and / or outside the sauna
 • Attractive front panel separated from the power unit
 • Generous power for simple installation and subsequent expansion
 • Interior display temperatures up to 120 ° C
 • Modular control structure, bus
 • Temperature setting of 30 ° C to 110 ° C (1 ° C increments)
 • Programmable functions for example Start time, off time, correction values ​​..
 • dimmable lighting
 • Multiple control units can be connected to the same power unit
 • Safety temperature limiter
 • Programmable safety shutdown of 4h to 12h
 • Automatic error detection in sensor failure,
 • Sensor short-circuit or out of the standard temperature range
 • Separate heating and lighting circuit

Technical data
 • Dimensions: 340 * 240 * power unit 108mm
 • exterior and interior panel 120 * 92 * 43mm (installation depth 36mm)
 • Suitable for heaters up to 9 kW (option: 16kW and 26kW  with power extension)

Delivery
 • Control Panel (for external and indoor use)
 • Power supply
 • Temperature Sensor
 • Over temperature protection including silicone cable
 • Data Cable
 • Assembly material


Technical details
Property name Value
Output, kW 4,5
Sauna room min, m3 3
Sauna room max, m3 6
Dimensions width, mm
Dimensions height, mm 1200 / ø 260
Dimensions depth, mm
Weight, kg 20
Stone capacity max, kg 80
Sauna room height min, cm 190
Supply voltage, phase 400 V 3N
Connection cable, mm2 5 x 1,5
Sensor cable, mm2 -
Data cable, mm2 -
Fuse A 3 x 10
Control unit Equipped
Water tank capacity, l -
Vaporisation effeciency -
Additional information -
Stones
Technical data sheet
Property name Value
Dimensions width, mm 92 / 240
Dimensions height, mm 120 / 340
Dimensions depth, mm 43 / 108
Weight, kg 1,2
Adjustable temperature min-max C 30 - 120
Heater output max, kW 9
Operating time, (h) 1 - 24
Pre-setting time, (h) 1 - 24
Max display, C -
Includes Basic module wave.com4 / Temperature sensor, excess temperature controller incl. silicon cable / Data connection cable / Assembly material and operating instructions
Additional information -

Add your commentary

Symbols count: 512