Select language 
SENTIOTEC Control Unit Wave.com4 is the absolute top product for real sauna lovers. The sauna control system offers innovative design, easy operation from inside and outside the sauna and can be individually upgraded.
Code 4743, 2380000000179
CONTROL UNIT SENTIOTEC WAVE.COM4 COMBI WC4-HT-S11
In ordering (Get info)
872.46 €
*inc.VAT 20%
Updated 28.06.2024
Innovative Technology
• Control panel for inside and / or outside the sauna
• Attractive front panel separated from the power unit
• Generous power for simple installation and subsequent expansion
• Interior display temperatures up to 120 ° C
• Modular control structure, bus
• Temperature setting of 30 ° C to 110 ° C (1 ° C increments)
• Programmable functions for example Start time, off time, correction values ..
• dimmable lighting
• Multiple control units can be connected to the same power unit
• Safety temperature limiter
• Programmable safety shutdown of 4h to 12h
• Automatic error detection in sensor failure,
• Sensor short-circuit or out of the standard temperature range
• Separate heating and lighting circuit
• Additional module for installation in the base part
• Evaporator Max. 3kW
• Control of the evaporator
• Control of the fan for better air circulation
• Operating temperature range 30-70 ° C in humidity,
• Preset the desired humidity in percentages (99%)
• Digital display of temperature and current humidity
• Remote activation by voltage signal
• Automatic temperature limit for steam operation (temperature in ° C and humidity must not exceed 140% in)
• Control the humidity module integrated in the basic module (no other control panel needed)
• Programmable drying program for sauna interior
• Water shortage signaling
• Control is effected by humidity sensorAdditional module for installation in the base part
Technical data
• Dimensions: 340 * 240 * power unit 108mm
• exterior and interior panel 120 * 92 * 43mm (installation depth 36mm)
• Suitable for heaters up to 9 kW (option: 16kW and 26kW power extension)
Delivery
• Control Panel (for external and indoor use)
• Power supply
• Temperature Sensor
• Over temperature protection including silicone cable
• Data Cable
• Assembly material
• including expansion board
• including bench sensor F2
• including remote start electronic
• Control panel for inside and / or outside the sauna
• Attractive front panel separated from the power unit
• Generous power for simple installation and subsequent expansion
• Interior display temperatures up to 120 ° C
• Modular control structure, bus
• Temperature setting of 30 ° C to 110 ° C (1 ° C increments)
• Programmable functions for example Start time, off time, correction values ..
• dimmable lighting
• Multiple control units can be connected to the same power unit
• Safety temperature limiter
• Programmable safety shutdown of 4h to 12h
• Automatic error detection in sensor failure,
• Sensor short-circuit or out of the standard temperature range
• Separate heating and lighting circuit
• Additional module for installation in the base part
• Evaporator Max. 3kW
• Control of the evaporator
• Control of the fan for better air circulation
• Operating temperature range 30-70 ° C in humidity,
• Preset the desired humidity in percentages (99%)
• Digital display of temperature and current humidity
• Remote activation by voltage signal
• Automatic temperature limit for steam operation (temperature in ° C and humidity must not exceed 140% in)
• Control the humidity module integrated in the basic module (no other control panel needed)
• Programmable drying program for sauna interior
• Water shortage signaling
• Control is effected by humidity sensorAdditional module for installation in the base part
Technical data
• Dimensions: 340 * 240 * power unit 108mm
• exterior and interior panel 120 * 92 * 43mm (installation depth 36mm)
• Suitable for heaters up to 9 kW (option: 16kW and 26kW power extension)
Delivery
• Control Panel (for external and indoor use)
• Power supply
• Temperature Sensor
• Over temperature protection including silicone cable
• Data Cable
• Assembly material
• including expansion board
• including bench sensor F2
• including remote start electronic
| Property name | Value |
|---|---|
| Dimensions width, mm | 92 / 240 |
| Dimensions height, mm | 120 / 340 |
| Dimensions depth, mm | 43 / 108 |
| Weight, kg | 1,2 |
| Adjustable temperature min-max C | 30 - 120 |
| Heater output max, kW | 9 |
| Operating time, (h) | 1 - 24 |
| Pre-setting time, (h) | 1 - 24 |
| Max display, C | - |
| Includes | Basic module wave.com4 / Temperature sensor, excess temperature controller incl. silicon cable / Data connection cable / Assembly material and operating instructions |
| Additional information | - |
Add your commentary